Product cover image

Technical Specifications

Feed speed, m/min 15-23
Machine units 1. Joint joint. 2. Clamping unit. 3. Facing unit. 4. Milling unit for removing overhangs. 5. Scraping unit with radius knives. 6. Scraping unit with straight knives. 7. Grooving unit. 8. Polishing unit.
Minimum part size, mm 120x80
Edge thickness, mm 0.4-3
Workpiece thickness, mm 10-60
Workpiece width, mm ≥ 80
Workpiece length, mm ≥ 120
Total power, kW 22,3
Working pressure, MPa 0.6
Dimensions LxWxH, mm 5867x830x1720
Weight, kg 2000

Automatic edge banding machine KE-655JHSKA

Purpose :
The KE-655JHSKA automatic edge banding machine of the pass-through type with pneumatic shifting of nodes and an upper glue bath with premelt is designed for simultaneous veneering of straight edges of furniture boards and blanks with synthetic roll material. Machine components Joint unit. Clamping unit. Ending unit. Milling unit for removing overhangs. Scraping unit with radius knives. Scraping unit with straight blades. Grooving unit on 2 sides. Polishing unit.

Distinctive features :
Feed speed 15-23 m/min; Top glue pot with pre-melt ; Automatic changeover to 2 different edge thicknesses by quickly pressing the corresponding button on the machine control screen; Automatic changeover to 4 different workpiece thicknesses by quickly pressing the corresponding button on the machine control screen (with memory); Infrared lamp for heating the end face of the workpiece; Conveyor feed with encoder system; edge counter; Reinforced conveyor; 5 pressure rollers with scrapers; Pneumatic mechanism for removing scraping chips from the workpiece; Two units with cleaning liquid - one in front of the jointing unit and the second in front of the polishing unit; Control panel "Touch screen"; Built-in waypoint control for non-contact control of processing units; Possibility of programming technological breaks; Individual frequency converter for each working node; Lighting in the protective cabin; Limit switches on the doors in the protective cabin; Stock dispenser rod prevents damage to machine components during operation; Pneumatic shutter on the glue roller, prevents it from getting dirty; Adjustment of the front and rear overhangs of the edge from the control panel; Execution according to CE standards.

Technical Specifications

Feed speed, m/min 15-23
Machine units 1. Joint joint. 2. Clamping unit. 3. Facing unit. 4. Milling unit for removing overhangs. 5. Scraping unit with radius knives. 6. Scraping unit with straight knives. 7. Grooving unit. 8. Polishing unit.
Minimum part size, mm 120x80
Edge thickness, mm 0.4-3
Workpiece thickness, mm 10-60
Workpiece width, mm ≥ 80
Workpiece length, mm ≥ 120
Total power, kW 22,3
Working pressure, MPa 0.6
Dimensions LxWxH, mm 5867x830x1720
Weight, kg 2000