Soft Forming Edge Bander KDT KB-399R

This edge bander features irregular edge servo-controlled profile milling, straight edge pre-milling, servo-controlled tape scoring and gluing, irregular edge servo-controlled pressing, straight edge gluing and pressing, end cutting, corner rounding, and separate fine trimming, scraping, flat scraping, and buffing units for straight and irregular edges. 【1】 It features one-touch, interference-free switching among five edge profiles: straight, beveled straight, beveled arc, duckbill arc, and full arc. 【2】 The corner rounding unit flexibly adapts to irregular edges to minimize contact impact and can round tape corners into multiple profiles. 【3】 Trimming and scraping units are fitted with position indicators for the upper and lower cutters, enabling quick cutter setup for laminated and non-laminated panels. 【4】 The PC-based control system displays faults in graphics and text for quick troubleshooting. 【5】 It features servo control and one-touch profile switching for higher efficiency. 【6】 The servo profile milling unit features four servo axes for precise cutter control and supports quick profile switching. Two counter-rotating cutters for each profile minimize edge chipping and tape lifting. 【7】 The servo pressing unit supports one-touch profile switching for precise pressing. 【8】 The tape scoring unit features servo-controlled scoring height adjustment, with a position indicator for quick scoring depth adjustment. 【9】 The heating lamp and hot air unit preheat the edge and tape to improve tape bonding before pressing. 【10】 The end cutting unit is fitted with an auto lubrication system to ensure its smooth operation and longer service life. 【11】 Flat scraping and buffing units are equipped to remove excess glue lines and clean the finished edge.